Top Quality, Rigorously Tested bandsaw blades are supplied in coils or in welded loops. Made in our most modern factory, we have a comprehensive range of bandsaws for cutting ferrous and non-ferrous metals, wood and plastic, and other commonly used materials.
| Regular M2 | |||
|---|---|---|---|
| Size in mm | Size in inch | Constant Pitch | Variable Pitch |
| 13X0.65 | 1/2X0.025 | 6, 10,14 TPI | 8/12, 10/14 TPI |
| 13X0.90 | 1/2X0.035 | 3, 4, 6, 8, 14 TPI | 8/12, 10/14 TPI |
The Silver Matrix II Bimetal Bandsaw is manufactured from 8% Cobalt HSS edge material Laser beam welded to high quality spring steel backing material. The Superior properties of tooth cutting edge with controlled tungsten and carbon content will give good result for cutting high vibration sawing.
Specially designed tooth geometry having large gullet and standard rake angle.
| Sr. No. | Size in MM | Constant TPI | Variable TPI |
|---|---|---|---|
| 1 | 13 X 0.60 | 10, 14, 18, 24 | 8/12, 10/14 |
| 2 | 20 X 0.90 | 6, 10, 14, 18 | 8/12, 10/14 |
| 3 | 27 X 0.90 | 6, 10, 14 | 8/12, 10/14 |
Cutting Application: M. S., Low carbon steel, Medium alloy steel, Non-ferrous metal and Structural steel having thinner and hollow section.
The Gold M42 Bandsaw is manufactured with HSS M42 edge material having excellent wear resistance characteristic Laser beam welded to special BIPICO spring steel backing material having excellent fatigue life. The Perfect distribution of Carbide with martensitic structure provides excellent cutting edge.
Specially designed tooth geometry having large gullet and standard rake angle.
| Sr. No. | Size in MM | Constant TPI | Variable TPI |
|---|---|---|---|
| 1 | 13 X 0.60 | 10, 14, 18, 24 | 8/12, 10/14 |
| 2 | 13 X 0.90 | 10, 14, 18, 24 | 6/10, 8/12, 10/14 |
| 3 | 20 X 0.90 | 6, 10, 14 | 4/6, 5/8, 6/10, 8/12, 10/14 |
| 4 | 27 X 0.90 | 6, 10, 14 | 4/6, 5/8, 6/10, 8/12, 10/14 |
| 5 | 34 X 1.1 | 4, 6, 8 | 3/4, 4/6, 6/10, 8/12, 5/8 |
| 6 | 41 X 1.3 | 4, 6 | 3/4, 4/6, 8/12, 5/8 |
Cutting Application: M. S., EN series Alloy steels, High carbon steels, Structural steels, tool steel having cutting large profile and solids (Upto 35 HRC)
Specially designed tooth geometry with positive rake angle.
| Sr. No. | Size in MM | Constant TPI | Variable TPI |
|---|---|---|---|
| 1 | 20 X 0.90 | - | 4/6 |
| 2 | 27 X 0.90 | 4, 6 | 3/4, 4/6 |
| 3 | 34 X 1.10 | 4, 6 | 3/4, 4/6 |
| 4 | 41 X 1.30 | 2, 4, 6 | 3/4, 4/6 |
Cutting Application: Low alloy steel and Unalloyed tool steel.
Specially designed tooth geometry having strong tooth for absorbing shocks due to interrupted cut.
| Sr. No. | Size in MM | Constant TPI | Variable TPI |
|---|---|---|---|
| 1 | 20 X 0.90 | - | 4/6, 5/8, 5/7 |
| 2 | 27 X 0.90 | - | 2/3, 3/4, 4/6, 5/8, 5/7 |
| 3 | 34 X 1.10 | - | 2/3, 3/4, 4/6, 5/8, 5/7 |
| 4 | 41 X 1.30 | - | 2/3, 3/4, 4/6, 5/8 |
| 5 | 51 X 1.60 | - | 4/6, 3/4, 2/3 |
| 6 | 67 X 1.60 | - | 2/3, 3/4 |
Cutting Application: Bundle cutting for pipes, Tubing and Structural Steel.
Specially designed tooth geometry with positive rake angle having additional relief angle and deep gullet.
| Sr. No. | Size in MM | Constant TPI | Variable TPI |
|---|---|---|---|
| 1 | 20 X 0.90 | - | 3/4, 4/6 |
| 2 | 27 X 0.90 | - | 2/3, 3/4, 4/6 |
| 3 | 34 X 1.10 | - | 2/3, 3/4, 4/6 |
| 4 | 41 X 1.30 | - | 2/3, 3/4, 4/6, 1.4/2 |
| 5 | 54 X 1.60 | 1.25 | 2/3, 3/4, 4/6, 1.4/2, 0.75/1.25 |
| 6 | 67 X 1.60 | 0.75, 1.25 | 2/3, 3/4, 0.75/1.25, 1.4/2, 0.75/1.10 |
| 7 | 80 X 1.60 | 1.25, 0.75 | 2/3, 3/4, 0.75/1.25, 1.4/2, 0.75/1.10 |
Cutting Application: Structural steels, Deep drawing steel, Machine steel, Spring steel, medium alloy steel, Nitrating steel, Stainless steel.
Specially designed tooth geometry with extreme positive rake angle having additional relief angle and deep gullet for aggressive cutting.
| Sr. No. | Size in MM | Constant TPI | Variable TPI |
|---|---|---|---|
| 1 | 27 X 0.90 | - | 2/3 |
| 2 | 34 X 1.10 | 4, 6 | 2/3 |
| 3 | 41 X 1.30 | 4, 6 | 2/3 |
| 4 | 54 X 1.60 | 2, 4, 6 | 2/3 |
| 5 | 67 X 1.60 | - | 2/3 |
Cutting Application: Deep drawing steel, Spring steel, Case hardened steel, Nitrating steel, tool steel, Quenched & Tempered steel and Hot work steel.
Specially designed skip tooth with shallow gullest and positive rank angle.
| Sr. No. | Size in MM | Constant TPI | Variable TPI |
|---|---|---|---|
| 1 | 20 X 0.90 | 3.6 | - |
| 2 | 27 X 0.90 | 3.6 | - |
Cutting Application: Aluminum die casting extrusion and other Non-Ferrous Metals / Alloys.
The Platinum M51 Bandsaw is manufactured from HSS M51 (10% cobalt) Edge material Laser beam welded to specially designed BIPICO spring steel backing material. Platinum M51 blade has excellent wear and red hot resistance due to higher percentage of tungsten and cobalt. It has proper distribution of dense hard carbide elements to give superior cutting performance.
Specially designed tooth geometry with positive ranke angle having additional relief angle and deep gullest.
| Sr. No. | Size in MM | Constant TPI | Variable TPI |
|---|---|---|---|
| 1 | 27 X 0.90 | - | 2/3, 3/4, 4/6 |
| 2 | 34 X 1.10 | - | 2/3, 3/4, 4/6 |
| 3 | 41 X 1.30 | - | 2/3, 3/4 |
| 4 | 54 X 1.60 | - | 2/3 |
| 5 | 67 X 1.60 | - | 1.4/2, 3/4, 2/3, 0.75/1.25, 0.75/1.10 |
| 6 | 80 X 1.60 | - | 1.4/2, 3/4, 2/3, 0.75/1.25, 0.75/1.10 |
Cutting Application: Stainless Steel, Deep drawing steel, Machining steel, Quenched and Tempered steel, Case hardened steel, Spring steel, Alloy Steel, Hot work steel, Nitrating steel, Cold work steel, High Speed steel, Cast iron steel, Rush and heat Resistant steel. It can be used for Hardened material upto 45 HRC.
Specially designed tooth geometry with extreme positive ranke angle having additional relief angle and deep gullest for aggressive cutting.
| Sr. No. | Size in MM | Constant TPI | Variable TPI |
|---|---|---|---|
| 1 | 27 X 0.9 | - | 2/3 |
| 2 | 34 X 1.10 | - | 2/3 |
| 3 | 41 X 1.30 | - | 2/3 |
| 4 | 54 X 1.60 | - | 2/3 |
| 5 | 67 X 1.60 | - | 2/3 |
Quenched and Tempered Steel, Case hardened steel, high alloy steel, Hot work steel, Nitrating steel, Stainless steel, High Speed steel, cast iron steel, Rust and heat resistant steel. it can be used for hardened material upto 45 HRC.
Carbide Tipped Bandsaw is recommended for cutting harder and difficult - to - machine alloys with better surface finish. It gives higher Productivity at economical cost.
Bipico Tri Chip
Non-set carbide tipped bandsaw available in standard Hi-Lo geometry with Positive main angle.
Cutting Application: Aluminum, Steel and Tool Steel
Bipico Multi Chip X-TRA
Non-set carbide tipped bandsaw available with positive main angle with 5 tooth geometry for aggressive cutting.
Cutting Application: Aluminum Alloy, Difficult - to - cut Aluminum, in general Aluminum application on automatic high speed machine.
Bipico multi Chip Sins
Non-set carbide tipped bandsaw with positive main angle with 4 tooth geometry.
Cutting Application: Cutting of stainless steel, difficult tool steel, Titanium, Inconel alloys, Graphite and in general difficult to cut material.
| Bipico Multi Chip Sinus / Multi Chip X -tra / Tri Chip | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size TPI Inch | Teeth Per Inch | |||||||
| MM | 0.75 / 1.25 | 1 / 1.3 | 1.4/2 | 2 | 2/3 | 3 | 3/4 | |
| 3/4" | 20 x 0.9 | |||||||
| 1" | 27 x 0.9 | |||||||
| 1 1/4" | 34 x 1.1 | |||||||
| 1 1/2" | 41 x 1.3 | |||||||
| 2" | 54 x 1.3 | |||||||
| 2" | 54 x 1.6 | |||||||
| 2 5/8" | 67 x 1.6 | |||||||
| 3" | 80 x 1.6 | |||||||
= Available TPI in all above 3 Grades of Carbide Tipped Bandsaw
